Atlona® OmniStream R-Type Single-Channel Networked AV Decoder

Product code: AT-OMNI-521
Availability: instock


$960.00

  • AV decoder for HDMI® up to 4K/UHD
  • Embedded audio and RS-232 or IR control pass-through
SKU: AT-OMNI-521 Category: Tags: ,
OR

Description

Atlona® OmniStream R-Type Single-Channel Networked AV Decoder

The Atlona® OmniStream™ 521 is a single-channel networked AV decoder for HDMI 2.0/HDCP 2.2 output supporting resolutions up to 4K @ 60 Hz and HDR (High Dynamic Range), and RS-232 or IR pass-through. It is part of the OmniStream R-Type Series, designed for high performance, flexible distribution of AV over standard, and off-the-shelf Gigabit Ethernet switches in residential and light commercial audiovisual applications. The OmniStream 521 is HDCP 2.2 compliant and ideal for the latest Ultra High-Definition and HDR sources. It features advanced high-quality, VC-2 visually lossless video compression that is optimized for motion video content. The Atlona® OmniStream 521 achieves extremely low, sub-frame latency when paired with OmniStream AV encoders. This single-channel decoder is housed in a half-width rack enclosure with front-to-back air flow, and is ideal for high-density, compact installation in distributed, multi-display installations.

High Performance 4K HDR

OmniStream R-Type supports 4K HDR, including HDR10 @ 60 Hz and 10-bit color, as well as HLG (Hybrid Log-Gamma) for future 60p HDR broadcast services. OmniStream delivers the image quality you demand from baseband video, using high performance, visually lossless compression optimized for fast-motion video content.

Ultra-Low Latency

OmniStream R-Type delivers the best of both worlds – uncompromised picture quality and just half a frame of encode-decode latency, the lowest for any AV over Gigabit Ethernet platform. This equates to a delay of just 8 milliseconds with 60 Hz video.

Plug and Play Compatibility with Network Switches

OmniStream R-Type is ready to go with industry-leading network switches from Cisco and others. All you need to do is connect your devices to the network and upload a configuration file to the switch. Forget about tedious manual setup procedures.

Works with Existing Network Cabling

One of the most significant costs of AV integration is new cabling infrastructure. The beauty of OmniStream is that it’s ready for use with the network cabling already in place for a residence or facility, going as far back as CAT 5e.

 

Additional information

Weight1.5 lbs
Dimensions8.2 × 1.3 × 4.4 in

Recent Viewed