Binary 520 Series 1080p HDBaseT Long-Range Extender with IR, RS-232 & Ethernet + IR Kit

Product code: KIT-520-330-SM-IRF
Availability: instock


$799.00

  • Full 1080p HD 36-bit Deep Color to 330 ft
  • Clock-stretching Solution for older HDMI 1.3 sources
  • Kit includes (1) B-520-EXT-330-RS-IP, (1) IRF-1 and (1) EE-IR-RCVR-SM
SKU: KIT-520-330-SM-IRF Category: Tags: , ,
OR

Description

Binary 520 Series 1080p HDBaseT Long-Range Extender with IR, RS-232 & Ethernet + IR Kit

Extend audio/video signals over long distances without sacrificing resolution quality – and get complete control with bi-directional IR, RS-232 and IP – thanks to the HDBaseT™ technology of the Binary™ Single CAT 5e/6 HDMI Extender. This product transmits HDMI signals up to 330 ft., all over a single Cat 5e/6 cable. Bi-directional Power over Cable (POC) eliminates the need for a bulky power supply behind the TV and saves valuable install time, while plug & play technology bypasses frustrating EQ and EDID settings. Add in the included Episode® Surface Mount Plasma/LED-Proof IR Sensor and Single IR Flasher with LED Feedback, and you’ve got a kit that packs some serious punch! Add the extender, and it solves for a clock stretching solution that was needed for old set top boxes that used HDMI 1.2. Kit includes (1) B-520-EXT-330-RS-IP, (1) IRF-1 and (1) EE-IR-RCVR-SM.

Limited 4K Resolution – This extender uses HDMI 1.4 chip and passes video up to 4K@30Hz 4:2:0 at a limited distance.
Power Supply Voltage – Binary HDBaseT HDMI extenders use a 12 Volt DC power supply. Using the 12 Volt DC power supply with any 5 or 24 Volt Binary product will result in damage to the product and possibly the power supply. Be sure to use the correct power supply with the correct product!
Shielded Cable Recommendation – Although HDBaseT transmission technology is much less susceptible to EMI interference than other transmission technologies, if possible, it is recommended that you pull shielded Cat5e/Cat6 with this product for maximum reliability. Please note: for proper shielding, shielded connectors must be used with drains connected at both ends. In addition, “EZ end” connectors are not recommended for use with HDMI extenders.

2-Year Limited Warranty

This Binary product has a 2-year limited Warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty will not apply to products that have been abused, modified or disassembled. Products to be repaired under this warranty must be returned to SnapAV or a designated service center with prior notification and an assigned return authorization number (RA).

Recent Viewed